Print 012

Wrap size 4.1 inches tall by 9.3 inches wide.  

UVDTF Print: Double sided. This one functions like a sticker and no additional equipment is needed. 

SUBLIMATION Print: This one requires additional equipment. 

Suggested Instructions to apply UVDTF:

• Clean cup to take off any dust. (Avoid using alcohol)
• Peel the transfer off.
• Center the transfer in the desire position. (Once transfer is set on glass, it won't come off!)
• Press the transfer down on the cup working your way center outwards to push the bubbles out. (No heat required)
• Peel clear film of slowly and gentle.

Suggested instructions to apply a sublimation print:

• Clean cup with alcohol to remove any dust.
• Once cup dries, tape the print around it very tight using heat tape.
• Set your machine to 350 degrees 
• Insert your cup in the press and press for 80 seconds.
• Rotate the cup and press for another 80 seconds.
• Remove the cup from press and let it cool down.
• Remove the paper from the cup. 

* Remember to wear heat protection gloves

* Settings can vary based on equipment being used and room temperature. 

Care Instructions:

1. Do not soak in water. 

2. Do not rub on the decals. 

3. Avoid extreme heat.

4. Hand wash only. 

I DO NOT SELL THE FILES ONLY THE PRINTS. I don't own the rights to the designs, all credit goes to the artist. 

****Colors and size will vary compared to this image mockup on this listing. 

****We are not responsible for any transfers that are pressed incorrectly.